holders

Bxa 250-222 Wedge Type Tool Post For Lathe 10 15 With 7pc Tool Holders

   Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line), such as: South Bend 13", 14" & 1307, Delta 14", Logan 14" Emco: Elnomat13S, Harrison: 11,12 &13", Sheldon: 11 &13, Clausing: 1300 series, Monarch: 13, Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes. This Wedge type tool post is precision engineered to assure repetitive accuracy. Wedge type tool posts Have the Maximum ridigity to get the chatter free performance. No time wasted with shims. All working parts hardened and precision ground. BXA 250-222 Wedge Type ...

6pcs Oxa Wedge Type Quick Change Tool Post 250-000 Set Lathe Holders For Mini

   6Pcs OXA Wedge Type Quick Change Tool Post 250-000 Set Lathe Holders For Mini Lathe 6-9 Swing Steel Material. Brand new; Made of steel, Wedge Type. The quick change tool holder is the main accessory of the ordinary small lathe. It can select the corresponding tool holder according to the needs of the workpiece. It has the characteristics of rapid tool change, high positioning accuracy and strong rigidity. 250-000 Wedge Type Tool Post 250-001 Turning & Tool Holder, use tool bit up to 1/2", 250-002 Boring, Turning & Facing Tool Holder, use tool bit up to 1/2" 250-004 Boring Bar ...

Emco Maximat Super 11 Lathe Quick Change Toolpost With 6 Holders & Wrenches F01x

  To obtain hobby machines, I travel regularly through out the Midwest, South and Eastern United States from my residence near Toledo, Ohio. It's cheaper but it ain't free. I do not deliver to Canada. I MIGHT BE ABLE TO DELIVER YOUR ORDER FOR LESS......... Emco_Hobby_Shoppe Listing Banner Revised 03/31/2024. I'm not looking for offers! THIS IS AS COMPLETE A SET AS I'VE EVER SEEN! Note: Includes quick change tool post set up for. Emco Maximat Super 11 lathe compound slide with 10mm post. Tool post base goes over 20mm base ring and. Includes top mounted nut, washer and custom ...

Yuasa 740-100 Quick Change Tool Post With Two Tool Holders, 740-101 And 740-104

This Yuasa 740-100 Quick Change Tool Post is a great addition to any metalworking shop. It comes complete with two tool holders, 740-101 and 740-104, and is in excellent condition, and comes with original boxes and instructions. The brown stuff you see on the tools is packing grease and will easily clean off. They don't look like been used much if at all. The brand is Yuasa, a well-known name in work holding equipment. It is perfect for those who want to save time and increase efficiency in their machining process. The tool post is compatible with a variety of lathes and is easy to ...

Hahn-kolb Lathe 40 Position Quick Change Tool Post With 2 Holders Big Lathe

Stantec Sales & Services is Offering the Following Equipment. Hahn-Kolb Lathe 40 Position Quick Change Tool Post With 2 Holders BIG LATHE. Does not have center bolt or t nut for compound. One of the holders height adjustment was broken and brazed see picture. All products are as is. I shall have no other obligation or liability, direct or indirect, of any kind, including liability for special, incidental, or consequential damages. This item is for sale locally and may end at any time.   

Multi-fix Quick Change Tool Post With (2) Holders & Toolrack

Multi-Fix Quick Change Tool Post w/ Factory Handle. Considered a Very Sturdy Tool Holder. Rack is 14 X 31/2 in. Tool holder slot will hold up to. This tool set was designed for 10 in or larger lathes. This set basically is similar in sizing to AXA tool posts. This tool post will fit on a factory Emco super 11 stud. Listings could be ended early or at any time as all items are for sale locally, where listings have multiple quantities only the quantity will change.   

Multifix A 40position Quick Change Tool Post For 150-300mm Lathe 6-12 Holders

   1 5 PIECE MULTIFIX QUICK CHANGE TOOLPOST SET. Lathe 40 Position Quick Change Tool Post size A1. (Some manufacturers and dealers call this model size A). Can be used on BV20, SINO210V, D240, CQ6125 bench lathe which turning diameter is from 150 to 300mm(6"-12"). One set A1 includes: 1 X 540-100 tool post and locking wrench. 3 X turning facing tool holders A1D2090. Can hold 20 MM (20/25"=0.8") shank turning tool. Will hold tool 8mm to 20mm. 1 X boring turning facing tool holder A1B2090. 1 X Tool Clamping T wrench. The spline of the tool holders are EDM cut, not fine ground. Canada, ...

Bxa 250-222 Wedge Type Tool Post For Lathe 10 15 With 7pc Tool Holders New

   Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line), such as: South Bend 13", 14" & 1307, Delta 14", Logan 14" Emco: Elnomat13S, Harrison: 11,12 &13", Sheldon: 11 &13, Clausing: 1300 series, Monarch: 13, Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes. This Wedge type tool post is precision engineered to assure repetitive accuracy. Wedge type tool posts Have the Maximum ridigity to get the chatter free performance. No time wasted with shims. BXA 250-222 Wedge Type Tool Post For Lathe 10 - 15 With 7PC Tool Holders New. All...

Machinist Lathe Tool Aloris Ca Wedge Tool Post With 8 Holders

For sale is a used Aloris CA Wedge Tool Post, in good usable condition, moves smoothly. T-Nut measures approx 3-1/8 wide x. 475 thick at bottom, 1-3/4" wide x 3/8" at top. Includes 8 Holders, 5 are CA2, 1 is a CA4, 1 is a CA8, 1 is a CA12. All the holder set screws and adjust nuts have been cleaned and oiled and move freely. Please view all pics as they are part of the description. I try to describe most of the items to the best of my ability, there are times when hubby inserts info onto a Post-It-Note that you will see in the pics. Please view all pics, as they are part of the ...

Pages